FOR SALE

393 CID Chevy IMCA motor - Eagle crank and rods - splayed caps - Ultradyne flat tappet cam - Dart heads - roller rockers - JE pistons - Edelbrock intake - 5 shows since freshened - $4200 - call 507-283-4482 or 507-227-1114 and ask for Mert

352 CID roller motor - 400 block - Eagle 3.25 crank - Eagle rods - JE pistons - Ported Dart Iron Eagle heads - Edelbrock intake - Comp roller cam and lifters - roller rockers - 4 shows since freshened - $5200 - call 507-283-4482 or 507-227-1114 and ask for Mert

2007 Pro Chassis Modified - Metric clip - bare chassis with some tin and two sets of upper a-frames $1650
I also can complete the front end, steering, tubular nova lowers and 2-link stuff to help complete the car if interested would make a great b-mod and very cheap for newer car. Thanks.
Don Gerritsen Jr.
Phone 1-712-472-3924
Cell 1-712-470-5800

Pro modified for sale. This is
Chassis #22-97 it is a leaf spring car and is real straight. $4,000 for the rolling
chassis it will come with everything but the motor and rear gear. I have
two Powerglides and one case as well as several parts for the glides. The
driveshaft was the one I ran with the glide in this car. This is a multi
leaf car with the Howe springs in the back. It has a lift arm with nearly
new eliminator on it, only five races on the shocks all are Pro shocks. Call my cell at
479-243-5797. Robby Hines

2007 Pro Chassis mod roller or complete, Mopar motor, metric frame, 2-link, QA1 shocks, 32 gallon cell. call Mark @ 712-470-0798

2006 pro mod. new Howe rad. qa-1 shocks, Carrera springs, gauges new this year, everything was new in 2006 - car has around 28 nights on it and is straight, no junk. Also has 32 gal. fuel cell, setup as a 2 link, everything goes except motor, trans, rear gear, seat and belts $5500 for roller or $8500 complete. 712 475 2891

For Sale- 2003 pro chassis wide car (impala clip) New body, decking, interior, Allstar fiberglass roof. Set up as a Z-Link on swingarm, (has 4 link mts. also) BSB eliminators, Eibach springs, Bilstien shocks, All new Qa-1 Chromemoly heims throughout car. Winters lightweight hubs, scalloped rotors, gundrilled axles, Allstar buiscut pull rod. 22 Gal. Jaz cell, Ramco performance fuel filter system. All the best parts on car....$5500 OBO 701-367-9487 .....Ryan

For sale 2004 Pro Chassis roller metric frame , 3 link, comes with 2 radiators, fan shroud, 2 sets of headers, extra shocks and springs 2 sets of lower control arms all new bushings and ball joints and shock brackets, 2 sets of spindles all reamed for bigger ball joints, seat, fuel line, gauges, axles, 2 drive shafts, 32 gal fuel cell $3400

Call 1-320-394-2496 or 1-320-894-7822 ask for Matt Suckow

UMP Modified in any stage you want, Turn Key to Bare Frame. '03 Pro Chassis with 12 nights in '03, 0 nights in '04, 28 nights in '05, 39 nights in '06, and 7 nights in '07.

This car was my backup this year. I do not need two race ready cars. The car finished 82nd in UMP National Points in 2006. Has 1 feature win at Fairbury, IL and many top 5's and 10's.

Motor is a midline 406 Chevy with 27 nights since fresh. I'm not an engine man, but I'd say high 500's HP with great torque. I can get specifics you are serious. Gaerte Carb, MSD Type Distributor with Blaster 2 Coil and MSD 6AL ignition box.

Griffen Radiator, Gaerte Carb, Butlerbuilt Seat, BERT Tranny, Fiberglass Roof, Mitler Bro's Rear End.

Car setup 4Bar/4Bar, but can be anything you want.

Serious Inquiries only please. $11,000 race ready, $5000 minus motor, bellhousing, tranny, driveshaft, and gear. Call for any other stages.

Jeff Curl
Home - 815-657-8862
Cell - 630-346-0230
http://www.curlracing.com